TAG Ceramic
Technical resources

Technical Specifications

A practical reference for TAG Ceramic 600×600 porcelain tiles, with a clear distinction between core product information and project-specific technical approval.

Core 600×600 reference

Product and packing reference

TAG Ceramic's core 600×600 porcelain range is planned around a practical project format. Use the exact product page, current quotation and approved technical documents for final ordering.

  • Nominal format: 600×600 mm
  • Typical core nominal thickness: 8.5 mm
  • Typical core packing: 4 pieces per box
  • Typical core box coverage: 1.44 m² / approximately 15.5 sq.ft.
  • Typical core gross box weight reference: approximately 25 kg
Product-specific approval

Do not infer performance from a finish name

Matt, Glossy, Rustic, Sand Effect and Sugar describe surface character. Wet-area, exterior, slip-related, chemical, mechanical and other technical suitability must be checked against the exact product data and the project condition.

  • Check the exact design, finish, size and current packing before ordering
  • Use declared/tested values only where they apply to the selected product
  • Keep tile-body performance separate from waterproofing of the installed assembly
  • Confirm grout, adhesive, substrate and movement requirements with the installation system
Project documents

Use current approved information

Website content supports selection and comparison, but project approval should use the current quotation, approved sample, packing information and any product-specific technical document supplied for the order. If a value is not shown or documented, ask TAG Ceramic before specification.